Machining site of deburring and chamfering tools for front and back sides (the customer only needs reverse chamfering)

Customer needs reverse chamfering and deburring workpiece material: Casting

Hole diameter: 8mm

Selected front and back deburring and chamfering tools: SV-BW-7.5

Reverse deburring and chamfering processing parameters: n = 800, f = 100

Reverse tapping distance: 3mm; The rest are fast forward and fast backward.

Click to watch the video. You can choose to turn off the sound before watching to avoid disturbing others

Because the customer only needs reverse chamfering and deburring, the blade will be directly retracted into the tool body without rotating the direct machine tool fast feed. After passing through the hole, the blade will pop up automatically.

Only reverse a 3mm processing stroke, and the rest are fast backward procedures.

Processing effect comparison:

Machining results: customers are satisfied with the chamfer size and quality

If the customer thinks the chamfer is too large, we can reduce the chamfer size by increasing the feed or loosening the tail screw.

If the customer thinks the chamfer is too small, we can increase the chamfer size by reducing the feed or tightening the tail screw.

Click the picture to enter the product details page:

Our front and back deburring and chamfering tools can not only meet the requirements of reverse deburring, but also complete the forward deburring well. One pass, double-sided chamfering and deburring.

As the R & D and manufacturer of deburring and chamfering tools for front and back sides, we can provide customers with various non-standard solutions. Let you no longer worry about the problem of hole reverse burr.